The bending degree of the lighting panel mainly depends on the wind resistance pressure of the lighting panel. Under normal circumstances, the bending strength of the lighting panel should be kept above 120mpa. The distance between each sandalwood bar should also be kept between 1.0m-1.5m, whether it is frp or lighting board, the thickness must be guaranteed to be between 1.2mm-1.5mm. In this way, its entire wind-resistant pressure can be guaranteed to be above 1kpa.

So what is the bending strength of the lighting board?
1. First of all, the main factors are determined by the editor. I have already mentioned it above, and I will not repeat it here many times. However, the actual application effect still needs to be determined according to the quality of the lighting board. But we can't completely rely on the quality, because it is not only one-sided that can really determine the wind resistance effect. Therefore, we should pay more attention to the actual application. In many areas in China normally, the wind resistance pressure only needs to be guaranteed at 1kpa.
2. Secondly, if it is a professional manufacturer of lighting panels, it wants to produce high-quality lighting panels and ensure its special uses. The most important thing should be related indicators of performance, as well as the maintenance of light transmittance, and the ability of anti-ultraviolet radiation of the lighting board. There are mainly tensile strength requirements. The tensile strength is not only an item that needs to be monitored for lighting panels, but also has clear requirements in many lighting panels made of different materials.
If you have any questions about the bending strength of FRP lighting panels or if you are interested in FRP lighting panels, please contact us!
