Due to its advantages of high strength, corrosion resistance, light weight, sound insulation, good workmanship, high strength, and convenient installation, FRP has been widely used in the automobile industry, and the RV is no exception.
Let's take a look at a few maintenance tips:
1. Avoid contact with sharp and hard objects. If the RV collides with other objects during parking or reversing, it will cause damage such as scratches, and protective measures should be taken.
2. If damage is found, repair it in time. Check the car body frequently. If resin peeling, deep scratches, or exposed fibers are found, it must be repaired in time, otherwise the damage will be accelerated due to water infiltration.
3. The surface of the RV should always be kept clean. The surface contaminated by oil and other substances can be cleaned with ordinary household cleaners. Do not use strong corrosive solvents, decontamination powder or metal wire to scrub, so as not to leave scratches and affect the appearance. It can also be supplemented with a tool spatula when cleaning, but bamboo chips or plastic chips with a hardness lower than FRP should be used to avoid scratching the surface. Soft materials such as jersey, gauze, soft towel and soft foam can be used for scrubbing.
4. Avoid long-term exposure to the hot sun. A pergola should be set up at the parking place of the RV. Long-term exposure to the sun is not good for FRP, and the color of the gel coat layer will also be affected.
The above is the relevant introduction to the maintenance of fiberglass RV. I hope it can help you. If you have any other questions, you can contact us at any time. All of our staff will serve you wholeheartedly!