Because the lighting board itself is a material with relatively high water absorption, it is necessary to dehumidify the lighting board material before forming, and the temperature of the lighting board must be controlled within a certain range, mainly because the lighting board Cracking will occur under stress, so special attention must be paid to its stress. The daylighting panels formed in this way can achieve the ideal effect in terms of performance, and can play different important roles in different occasions.
Next, let's take a look at the bending of the lighting board. The common bending methods can be divided into two types, one is cold bending and the other is hot bending. The hot bending method is very important for the quality of the entire board. The above requirements are not very high, but the bending efficiency still needs to be improved; in the cold bending method of the lighting board, if the thickness of the board is thicker, the bending difficulty will be relatively higher , this point is relatively high for the quality requirements of the board itself, but the overall efficiency is also very high.
After a brief introduction, it will be more convenient for our daily use of the lighting board. If you are interested in FRP lighting panels, please contact us! We will get in touch with you as soon as we receive the news!