1. The wall is assembled in construction. The board and the board are tenon-joined into a high overall strength and the overall structure is stable. Therefore, it can be used as a stacking and large-span wall interval. It is anchored by steel structure, and the section steel is embedded in the wall with a large span. , Stacked walls do not need to increase the wall column, its impact resistance is 1.5 times that of general masonry. The overall seismic performance is higher than that of ordinary masonry walls and can meet the requirements of buildings with seismic intensity above level 8. It can be used in the construction of large-span and inclined walls with special requirements.
2. The weight of the wall is light, and its bulk density is 750~800kg/m³, and the unit area weight is 1/4 of the general 120mm thick double-sided plastered masonry, so it can reduce the weight of the structural wall, reduce the load-bearing of the beam and column foundation and the indoor can Arbitrary interval, and optimized beam and column structure, the overall indoor layout is more reasonable, and the use function is improved. Coupled with the advantages of increased use area and faster construction, its economic benefits are more superior.
3. Good fire performance, non-combustibility of the partition wall system reaches the national A1 level standard; good sound absorption and sound insulation performance, the composition of the partition wall system is filled with sound-absorbing materials, so that the board has good sound absorption performance; the light partition wall panel can Without any waterproof finish, the pool is filled with water by cementing the pool, the back of the wall can be kept dry without leaving any marks, and there will be no condensation on the wall in humid weather. Generally, masonry is not moisture-proof, and it will peel off after a long time.
4. The solid composite wallboard can be nailed, drilled, and expanded bolts can be nailed, drilled, and expanded at any position, and can be fastened and hung heavy objects. The single-point hanging force can reach 1000N, directly nail or use expansion bolts for hanging Heavy objects, such as air conditioners, wall cabinets, etc., have a single-point hanging force above 50kg; the skeleton of dry-hanging marble can be directly supported on the wall panel. At the same time, it can be pasted. The wall panel is used in rooms with special requirements such as kitchens and toilets. The surface can be used for other pasting decorations, just like ordinary walls.
5. Convenient construction: because it is a built-in construction, and the wall panels are smooth on both sides, no plastering is required. Compared with wall construction, the efficiency is increased by more than 10 times. And the installation process is simple, you can decorate and construct after installation, without waiting for the mortar to dry. Finishing can be done after installation, without masonry and plastering, which greatly shortens the construction period. There is no need for complex scaffolding to install the partition board, and the construction is convenient and quick.