Compared with the machine-made fiberglass reinforced plastic sheet was produced continuously by the machine, the manual plate still has several problems:

1. In order to pursue low cost it will use cheap raw materials to affect material characteristics
2. The quality is unstable, and factors such as worker level, temperature, environment, etc. have a greater impact on quality
3. The manual glass fiber reinforced plastic cannot be completely cured, the residual styrene content in the material is high, and the smell is heavy
4. The thickness of the product is not uniform, usually the thickness is large
5. There are defects such as pores and pinholes on the surface, and usually paint is sprayed during use; the back is rough, usually additional polishing
6. Low production efficiency, it is difficult to meet the requirements of large-scale production
7. The hand lay-up workshop smells heavy and it is difficult to keep the environment tidy, and the glass fiber is very harmful to the workers.
High-quality truck body panels are usually choose made of machine-made glass steel plates that are continuously produced by machines. All of Tangshan Runfeng Composite materials Co frp sheet using machine-made that are continuously produced by machines. They are light in weight, anti-corrosion, anti-mildew, and anti-corrosion. Impact, anti-aging, good weather resistance, light weight, low density, good flame retardancy, slow heat transfer, good thermal insulation, strong heat preservation and other characteristics, so that the goods can be better preserved. The surface is smooth and beautiful, easy to clean, and there is no need to worry about the appearance of rusty steel and iron.

