Normal daylighting panels are used on the roof, because they have more advantages in performance, such as very strong flexibility, good acid and alkali resistance, strong shockproof effect, relatively light texture, and the ability to block The effects of wind and hail resistance are very good, etc. When using the daylighting board, its effect is more prominent among many products, and it is also the preferred material for more roof construction. The use of daylighting boards can be seen in many construction projects The figure, and the bearing capacity is also very high, but in the process of construction, the corresponding protection measures should not be underestimated.
First of all, the on-site staff must wear safety helmets. If they are working at high altitudes, they must be in a steady state, mainly to ensure the stability of the horizontal strips. In order to avoid being blown off by strong winds, lighting should be Stack multiple boards, but the number should not be too much, three boards are better, and the entire ground of the construction should have corresponding safety warning signs, as well as operating safety inspectors, etc., and no irrelevant personnel should enter the site at will. And walk around to prevent accidents from causing personal injury, as well as the excess corner materials cut off from the lighting panels, and timely dispose of them as waste products.
