The daylighting board is a material that needs to be used in the roof structure, and it needs to be treated carefully during the process of installation and use. Otherwise, thorny problems such as water leakage will easily occur. Let's take a look at some of the reasons for the water leakage of the lighting panel, and what should be paid attention to.
The installation steps of the lighting board are very simple, but if there is a little mistake, it will greatly affect the user experience. Water leakage of the lighting board is a major manifestation of installation errors, which has brought a lot of trouble to users. Self-tapping screws are a critical small part during installation. Must pay attention to reasonable location installation. If the position of the self-tapping screw is inaccurate, it will lead to water leakage caused by the improper connection of materials.
Water leakage at the lap is also a problem that often occurs in the use of daylighting panels. Everyone should understand that if the wave of the lighting tile is too low, the rainwater will accumulate and cause water leakage. Therefore, everyone should pay attention to the coherence and tightness of the overlap between the lighting panels during installation, and it is best not to leave any gaps.
Leaks can also be caused by other reasons. For example, during the installation process, the screw position of the department has shifted, and the deformation of the waterproof gasket during the installation process will cause water leakage. Therefore, you need to be careful when installing the daylighting panel, and you need to check the details of each part after installation.
Don't worry if you do have water leaks. Check each detail to see which part has a problem. If there are problems with self-tapping screws, waterproof gaskets, etc., they can be replaced and repaired in time.
Want to learn more! Please pay attention to us Tangshan Runfeng Composite Material Co., Ltd.!