Compared with traditional building material products, as a new type of material, daylighting panels are gradually becoming more and more important in the market. The lighting board has many advantages, such as good UV resistance, strong chemical corrosion resistance, aging resistance, and good lighting performance. All equipment needs maintenance and protection, so it is necessary to disassemble and protect the lighting panel for a period of time, so what should be paid attention to during disassembly?

The staff must keep their movements steady and avoid bumps and other situations. Moreover, regarding the disassembly of the lighting board, during the whole process, it should be avoided to make the bottom surface contact with the two ends or delay, so as not to damage the surface of the board, thus affecting the normal use. Under normal circumstances, it is about every 2-3 pieces of loading and unloading.
During the entire disassembly process, attention must be paid to reasonably arranging the staff, and at the same time, safety should be ensured. Under normal circumstances, it must be ensured that there must be a staff member every three meters. When disassembling the glazing board, the staff is required to hold both sides of the board tightly with both hands, and keep the height of the hands consistent with the head. In addition, when it is hoisted to the roof, no bending is allowed in the vertical and horizontal positions, otherwise it may crack and lose its use value.
