FRP skylight sheet handling instructions:
1. When loading and unloading the FRP skylight sheet, avoid the bottom surface and the two ends of the FRP skylight sheet contact and drag or damage the surface of the sheet.
2, Stacking, should be stacked on the solid and smooth ground, and the bottom and top of each sheet to have the waste plate protection, it is strictly prohibited to place heavy objects on it, in order to avoid the FRP skylight sheet broken.
3. When workers load and unload the sheets, there must be one person every three meters, and hold both sides of the FRP skylight sheet with both hands, and the height of both hands is consistent with the head, so as to avoid breaking the FRP skylight sheet.
4, every 2~3 pieces of loading and unloading
5. When placing the sheets, there must be one person every three meters, and hold both sides of the FRP skylight sheet with both hands, and the height of both hands is consistent with the head, to avoid breaking the FRP skylight sheet.
6. When placing FRP skylight sheet, the height of each pile should not be higher than 0.75 meters.
7. In the process of lifting the FRP skylight sheet to the roof, it is strictly prohibited to bend vertically and horizontally in order to avoid its fracture.
