1. Lightweight. The composite wallboard is light in weight, and its bulk density is 750-800kg/m³, which is only 1/3-1/5 of the weight of 120mm wall + plastered walls on both sides.
2. Thin body, increase the use area, 90mm lightweight composite wall panel factory wall panel is equivalent to 18 walls, 120mm is equivalent to 24 walls, and 150mm is equivalent to 37 walls. It can increase the usable area by 4%-6%.
3. Fire prevention. The non-combustibility of the composite wall panel partition system reaches the national A-level standard. After the wall panel is installed, it has superior stability and integrity, and has good fire resistance. It can confine the fire and smoke and poisonous gas to the fire area, and it is not Dissemination of toxic gases, an extra guarantee for your safety.
4. Thermal insulation. The composite wallboard material determines that it has a good thermal insulation function, and its thermal insulation performance is three times that of brick-concrete walls. It can make your indoor environment more comfortable and fill the gap in energy saving and consumption reduction of building walls. It is an ideal product for building indoor and outdoor partition walls.
5. Sound insulation. The calcium silicate board on the surface of the composite board has a good sound insulation function, and the board connection concave-convex grooves and internal components have good sound absorption and sound insulation functions. The sound insulation of the 90mm thick wall board has been tested to reach 45db, which is higher than other brickwork. The sound insulation effect of the body is twice as high as that of the national housing.
6. Moisture-proof and waterproof. Calcium silicate composite wallboard has good waterproof and moisture-proof properties, and can be used in wet areas such as kitchens, bathrooms, basements, etc. Therefore, the wallboard will not be loosened due to moisture absorption, returned to halogen, deformed, and decreased in strength.
7. Anti-seismic. The overall effect is good. The partition wall board is assembled, and the board and the board are spliced into a whole. The impact resistance of the test is 1.5 times that of the general masonry wall; it is anchored by steel structure, the wall strength is high, and it can be made of high storeys and large spans. Partition wall; the overall seismic performance is ten times higher than that of ordinary masonry walls, and it can meet the requirements of buildings with seismic intensity above level 8.
8. Easy construction and high efficiency. Because it is prefabricated construction, the wall height is less than 4 meters, each group of about 3 workers, an average of one skilled worker can carry more than 15 square meters a day, and the wall is smooth on both sides without plastering, and the construction of the masonry wall Compared with the efficiency increase by more than 10 times.
9. Environmentally friendly new lightweight partition wall board raw materials 100% do not contain harmful substances to the human body, non-radioactive Class A products, comply with national standards, and the scope of application is not restricted.