The lighting board has the advantages of good thermal insulation. It should consist of high-performance upper membranes, reinforced polyester and fiberglass. The upper film should have good anti-ultraviolet and anti-static effects. UV resistance is designed to prevent polyester from yellowing, aging and premature loss of gloss. During use, attention should be paid to the correct installation work, otherwise the steel plate will fall off.
1. The design of the wall insulation system is reasonable. Wall insulation project is a systematic project. Matching parts of the various structural layers should be considered in the design. For materials with low strength or poor bonding force, the design of anchor bolts should strengthen and increase the bonding rate.
2. Strengthen the construction management and control of the mining sector. As a weak link in the quality control of building wall insulation engineering, the foundation wall should be checked and accepted before construction to ensure that the tensile bond strength of the foundation meets the requirements of the code, and the flatness of the wall is within the controllable range.
3. Do a good job in the selection and control of insulation system materials, and control the quality of polymer anchor bolts, anchor bolts and other materials in the external wall insulation system. Adhesives should be scientifically proportioned to ensure high molecular weight and supporting additives. In addition, the quality of the board should also be qualified.
In order to ensure that the light does not fall off, we need to do a control work from the source. The first thing to pay attention to is the quality of the board itself, and then take reinforcement measures to install and reinforce the board to better prevent it from falling off. Its lighting has no astigmatism, the light is soft, and the light transmittance is high, which can effectively block most ultraviolet rays.
