In general, the size of the manufactured lighting panels has a fixed size, but because of its size, it can be customized. Therefore, the sizes are different, and the styles displayed are also different. For the sake of beauty and cost reduction, it is the key link to cut the plates properly.
1. Determine the horizontal and vertical orientation of the daylighting board as far as possible so that the vertical size of the board is longer than the horizontal size, and the board is not allowed to bend horizontally.
2. Mark the size of the finished product before cutting, so that the cut plate will be accurate and beautiful.
3. When cutting, a dry air compressor must be used to blow out the pipe groove of the lighting board, which can reduce the release of rice husk ash to the air and keep it clean and tidy.
When cutting plates, if mobile tools are used, the plates should be clamped on the work table to avoid scratching the surface, and the protective film should not be removed in advance; when using manual tools, people should be asked to cooperate Fix the board, and after the cutting is completed, there should be no concave grooves and debris accumulation on the edge of the lighting board.
Want to learn more? Welcome to contact us! Or Google search Tangshan Runfeng Composite Material Co., Ltd.