The bending of the plate is still good , so it can also be loaded upright and tortuous shipment , but the maximum diameter of tortuous radian does not exceed the specification . Contact with the number and thickness of the mining plate , the best is still not tortuous , because this methed is suitable for 7mm below the mining plate.
That is , what happens when you lay the board directly on the vehicle? This is no problem , the end of the panel is flat with the side of the car , put the front of the panel over the roof , and bend the top panel all the way back . So not only stable , also not because of the vehicle and dangerous , but so the resilience of the light plate will be very large , if the number of not much then you can do so , because has always focus on the function of the light plate how good , so many people is a very strong information , but in fact , it is not our fantasy , improper use of the light plate is also very simple broken . So we'd better take some precautions.
Light mining plate is usually made of high quality UV film and excellent resin , but to obtain outstanding function , its production of curing degree can not be ignored . Because with the progress of curing degree of the mining plate , its hardness , mechancial strength will also improve . When the light mining plate is used , it is bound to be acted on by external forces . In order to avoid its crushing , it is necessary to control the external forces within the scope of rules.
In order to increase the patience of the light mining plate , some manufacturers will participate in the plasticizer in the production process , although it will improve the flexibility of the light mining plate , but the strength of the data will also be greatly affected , and then shorten his service life . In order to ensure the integrity of the mining plate , this practice must also be eliminated.
