Fiberglass Panels for Campers
Fiberglass Panels For Campers
The strength of the fiberglass panel for campers is several times that of the ordinary plastic panel. It is an important engineering wall material, with ultraviolet resistance, aging resistance, with very low thermal expansion performance, color, no need to spray paint and other characteristics, widely used in the field of interior and exterior decoration panel of RV.
Maintenance recommendations for the shell of FRP products:
1. Avoid contact with sharp and hard objects. In the process of parking or reversing, if the FRP RV collides with other objects, it will cause scratches and other damage, so protective measures should be taken.
2. If the shell of the FRP product RV is found to be damaged, repair it in time. Check the car body frequently. If the resin is peeled off, the scratches are deep, and the fibers are exposed, it must be repaired in time, otherwise the damage will be accelerated due to the infiltration of water.
3. The surface of the RV should always be kept clean. The surface contaminated by oil and other things can be cleaned with ordinary household cleaners. Do not use corrosive solvents, detergent powder, metal wire to scrub, so as not to leave scratches, and the image is beautiful. If the stain is difficult to remove, it can be cleaned with gasoline, kerosene, diesel, toluene, xylene, styrene, acetone, etc., but must be rinsed with clean water immediately after washing to prevent intrusion into the structure. When cleaning, you can also use a tool spatula, but you should use bamboo chips or plastic chips with a hardness lower than that of FRP to avoid scratching the surface. Soft materials such as jerseys, gauze, soft towels and soft foam plastics can be used when scrubbing the shells of glass-steel products RVs.
4. Avoid prolonged exposure to the hot sun. A pergola should be set up at the parking place of the RV. Long-term exposure is not good for FRP, and the color of the gel coat layer will also be affected.
5. Wax and polish regularly. In order to make the outer shell of Suizhou Juxin FRP products bright and to protect the gel coat layer, the exterior of the other car should be waxed and polished regularly. The material can be car wax or glass fiber reinforced plastic special polishing wax, which can be applied two to three times, with an interval of 2 hours between each pass, so that a tough wax film is formed on the surface of the glass fiber reinforced plastic. It is best to use a portable polishing machine to polish the surface, as the surface is as bright as new.
6. Apply paint to keep it beautiful and durable. The new RV with a gel coat layer looks beautiful, but after three to five years of use, the color gradually fades and loses its luster, and the dark color is worse than the light color. In order to maintain the beauty of the appearance of the RV, paint can be applied when the outer gel coat layer is old and has many scratches. Among the various paints, the surface of the RV should be cleaned first, and the wax should be removed with a dewaxing agent such as mold cleaning water, and sanded with water sanding paper. Deep scratches should be embedded with epoxy putty, and the paint should be applied after the preliminary work is done according to the paint requirements. (Painting is best), the painted caravan shell of Suizhou Juxin FRP products is as beautiful as a new caravan.
Our commitments to you
Runfeng specializes in the design, manufacturing and sales of FRP products and auto parts. The product categories involve dozens of industries. The main products are: FRP flat plate -- high gloss plate, sub-gloss plate and gel coat panel. FRP pattern panel -- anti-skid grain panel, stone grain panel, water corrugated plate linen grain panel and FRP composite panel; FRP composite panel, can be combined with EPS, XPS, PP honeycomb, PU, plywood and other core materials. Runfeng uses advanced veneer production line to produce FRP veneer, which has high strength, corrosion resistance, aging resistance, smooth surface, good heat insulation and uniform thickness. The thickness range is 1.5mm -- 3.5mm, the maximum width is 3.0m, and the length of each roll is 60M.There are advanced vacuum composite production line and other advanced supporting equipment . Runfeng will provide you with professional and timely products and services.
Relavant product with links:
Knowledges about FRP link: https://www.frpexpert.com/info/some-useful-links-season-61958886.html
Hot Tags: fiberglass panels for campers, China, suppliers, manufacturers, factory, customized, low price, for sale, FRP High Glossy Sheet For caravan, FRP panel for clean room, fiberglass repair sheets, Glossy FRP roll For Caravan, FRP High Glossy Sheet For RV, FRP High Glossy Sheet For Travel Trailer
Send Inquiry
