PU Sandwich Polyurethane Insulated Panel for Freezer

Facing each strong opponent, we always maintain the highest integrity, sincere service for each customer, at the same time, constantly improve the quality of our RV siding panels, flat fiberglass sheet kitchen, fibreglass corrugated roofing sheets. After years of steady development, we have established strategic cooperation relationship with many famous brands at home and abroad. We hope that in the future, we will become your best partner and grow together. Our company members have many years of professional relevant background, thus we can be more attentive on innovation. Our company has always been market-oriented, insisting on technological innovation as the foundation and source of development, and doing our best to meet the needs of new and old customers and solve the problems for them. The company has won the respect of the society with countless innovative practices and unremitting efforts.

Product Description

The most important performance of refrigerated trucks is thermal insulation. The insulation performance depends largely on the insulation performance of Freezer Sandwich Panels. There are mainly two types of panels widely used in refrigerated trucks in the market: metal skin and glass fiber reinforced plastic(FRP) skin. The refrigerated trucks with FRP skin, with its excellent heat insulation capacity, smooth and easy-to-placing appearance, and excellent mechanical strength, make it occupy a very large market share in the refrigerated truck wall panels.

The core materials of Freezer Sandwich Panels used in refrigerated trucks are mainly as follows: EPS, XPS and PU. Each core material has different characteristics. PU has the most excellent thermal insulation function, which is mainly used in refrigerated trucks with very high thermal insulation requirements, but its cost is relatively high. XPS also has excellent thermal insulation properties, and its cost is more economical than PU. At the same time, due to its excellent mechanical properties, it has the widest application range in refrigerated trucks. Although EPS has excellent thermal insulation properties and relatively cheap raw materials, but because its mechanical properties are not very good, so relatively few used in refrigerated truck applications.

When we buy Freezer Sandwich Panels, we need to pay attention to the following points

1. Whether the FRP board and the core material are bonded firmly, there is no cracking in the bonding area and the board is not obviously bulging;

2. Whether the surface of the FRP board is smooth and flat;

3. When purchasing a sheet with XPS as the core material, make sure that the core material has sufficient strength and XPS cannot be easily compressed.

In the design of refrigerated trucks, we need to pay attention to the control of the cold bridge. The cold bridge has a destructive effect on the insulation of refrigerated trucks. It will increase the cold consumption of refrigerated trucks and increase the fuel consumption of refrigerated trucks.

Since a large amount of the cold energy felt by the surface of the structure near the cold bridge is concentrated in the cold bridge part, the cold energy loss caused by the cold bridge greatly exceeds the value calculated simply by its cross-sectional area. The existence of cold bridge not only causes heat loss in refrigerated trucks, but also the part of the cold bridge becomes a weak link of the insulation structure, causing condensation, frost, icing, and moisture failure of the insulation structure on the higher temperature side of the insulation structure. , In severe cases, the structural layer is damaged by freezing.

According to the requirements of the market and the development trend of PU Sandwich Polyurethane Insulated Panel for Freezer, our company constantly enriches, adjusts and improves the product structure to face the market with high-quality products. We always strengthen safety management to achieve safe, healthy and stable development of the enterprise. Our company makes every effort to promote the construction of technology led innovation system and firmly establish the technology leading strategy.

Hot Tags: freezer sandwich panels, China, suppliers, manufacturers, factory, customized, low price, for sale, frp body panels, Kemlite, fibreglass reinforced polyester resin wall panel, Malaysia FRP Panel For Box Van, gel coat fiberglass, fiberglass roof panels under deck