Foton Chassis with Cimc One Side Cold Room Box and Thermo King Refrigeration Van

We purchase the most advanced large-scale professional production equipment at home and abroad, form a first-class production line and continue to invest a lot of money to develop new high-quality practical FRP Corrugated Fiberglass Roofing Sheet, RV exterior wall panels, 4mm Fibreglass flat sheet. Through our value service, customers really get the return. It is the purpose of our service and our value. The integrity of our employees as human beings and the integrity of our business are the fundamentals of our social responsibility. We are able to adjust ourselves to difficulties and setbacks arising from changes and positively influence and motivate our colleagues. With innovation in service research as the goal and innovation in institutional mechanisms as the means, we strive to create an innovative company with distinctive characteristics, full of vitality and vigor.

Product Description

The most important performance of refrigerated trucks is thermal insulation. The insulation performance depends largely on the insulation performance of Freezer Sandwich Panels. There are mainly two types of panels widely used in refrigerated trucks in the market: metal skin and glass fiber reinforced plastic(FRP) skin. The refrigerated trucks with FRP skin, with its excellent heat insulation capacity, smooth and easy-to-placing appearance, and excellent mechanical strength, make it occupy a very large market share in the refrigerated truck wall panels.

The core materials of Freezer Sandwich Panels used in refrigerated trucks are mainly as follows: EPS, XPS and PU. Each core material has different characteristics. PU has the most excellent thermal insulation function, which is mainly used in refrigerated trucks with very high thermal insulation requirements, but its cost is relatively high. XPS also has excellent thermal insulation properties, and its cost is more economical than PU. At the same time, due to its excellent mechanical properties, it has the widest application range in refrigerated trucks. Although EPS has excellent thermal insulation properties and relatively cheap raw materials, but because its mechanical properties are not very good, so relatively few used in refrigerated truck applications.

When we buy Freezer Sandwich Panels, we need to pay attention to the following points

1. Whether the FRP board and the core material are bonded firmly, there is no cracking in the bonding area and the board is not obviously bulging;

2. Whether the surface of the FRP board is smooth and flat;

3. When purchasing a sheet with XPS as the core material, make sure that the core material has sufficient strength and XPS cannot be easily compressed.

In the design of refrigerated trucks, we need to pay attention to the control of the cold bridge. The cold bridge has a destructive effect on the insulation of refrigerated trucks. It will increase the cold consumption of refrigerated trucks and increase the fuel consumption of refrigerated trucks.

Since a large amount of the cold energy felt by the surface of the structure near the cold bridge is concentrated in the cold bridge part, the cold energy loss caused by the cold bridge greatly exceeds the value calculated simply by its cross-sectional area. The existence of cold bridge not only causes heat loss in refrigerated trucks, but also the part of the cold bridge becomes a weak link of the insulation structure, causing condensation, frost, icing, and moisture failure of the insulation structure on the higher temperature side of the insulation structure. , In severe cases, the structural layer is damaged by freezing.

Our company's strict production management and excellent product quality are favored by customers, our orders are in an endless stream and our Foton Chassis with Cimc One Side Cold Room Box and Thermo King Refrigeration Van sold all over the world. In recent years, through the joint efforts of all levels of the company, we have finally formed a way to integrate social responsibility into daily operation, with the company's strategic development, corporate culture and soft power building. We are experiencing the leap from the industrial age to the data age, and the world is undergoing many earth-shaking changes.

Hot Tags: freezer sandwich panels, China, suppliers, manufacturers, factory, customized, low price, for sale, Fiberglass Corrugated Resin Sheet, glossy FRP sheet, white fiberglass sheet, grp sandwich panels, sandwich sheets, puf panel room price