+8615033490654
Color FRP Corrugated Panel Fiberglass Reinforced Sheet Roll for Greenhouse

Color FRP Corrugated Panel Fiberglass Reinforced Sheet Roll for Greenhouse

FRP Thickness: 1.2mm~4mm
Core Materials:EPS,XPS,PP Honeycomb,PET,PU,Plywood,etc.
Width: 0~2600mm
Length:0~6000mm
Color: white, grey, customized
FRP Finish: glossy, embossed
Send Inquiry
Product Details of Color FRP Corrugated Panel Fiberglass Reinforced Sheet Roll for Greenhouse

Product Introduction

We provide rich and high quality 12 foot fiberglass roof panels, frp truck body panels, glasteel fiberglass reinforced panels for our customers by increasing our product development efforts. Now and in the future, our company will provide better products and services for global customers with global cause and innovation spirit. Pursuing and continuously creating the maximum satisfaction of users is the core goal we put in our efforts and strive for. It is our responsibility to meet customer needs. With the continuous rapid development of the industry, our company's scale and strength have steadily developed in a good direction. After continuous improvement, it has become more mature and is able to offer better customer service.

Product Description

The most important performance of refrigerated trucks is thermal insulation. The insulation performance depends largely on the insulation performance of Freezer Sandwich Panels. There are mainly two types of panels widely used in refrigerated trucks in the market: metal skin and glass fiber reinforced plastic(FRP) skin. The refrigerated trucks with FRP skin, with its excellent heat insulation capacity, smooth and easy-to-placing appearance, and excellent mechanical strength, make it occupy a very large market share in the refrigerated truck wall panels.

The core materials of Freezer Sandwich Panels used in refrigerated trucks are mainly as follows: EPS, XPS and PU. Each core material has different characteristics. PU has the most excellent thermal insulation function, which is mainly used in refrigerated trucks with very high thermal insulation requirements, but its cost is relatively high. XPS also has excellent thermal insulation properties, and its cost is more economical than PU. At the same time, due to its excellent mechanical properties, it has the widest application range in refrigerated trucks. Although EPS has excellent thermal insulation properties and relatively cheap raw materials, but because its mechanical properties are not very good, so relatively few used in refrigerated truck applications.

image

When we buy Freezer Sandwich Panels, we need to pay attention to the following points

1. Whether the FRP board and the core material are bonded firmly, there is no cracking in the bonding area and the board is not obviously bulging;

2. Whether the surface of the FRP board is smooth and flat;

3. When purchasing a sheet with XPS as the core material, make sure that the core material has sufficient strength and XPS cannot be easily compressed.

1631150038

In the design of refrigerated trucks, we need to pay attention to the control of the cold bridge. The cold bridge has a destructive effect on the insulation of refrigerated trucks. It will increase the cold consumption of refrigerated trucks and increase the fuel consumption of refrigerated trucks.

Since a large amount of the cold energy felt by the surface of the structure near the cold bridge is concentrated in the cold bridge part, the cold energy loss caused by the cold bridge greatly exceeds the value calculated simply by its cross-sectional area. The existence of cold bridge not only causes heat loss in refrigerated trucks, but also the part of the cold bridge becomes a weak link of the insulation structure, causing condensation, frost, icing, and moisture failure of the insulation structure on the higher temperature side of the insulation structure. , In severe cases, the structural layer is damaged by freezing.

p1anel1

We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for Color FRP Corrugated Panel Fiberglass Reinforced Sheet Roll for Greenhouse. We recognize that we need to optimize our overall performance in each area. A corporate vision is an image or scenario held jointly by the company and its employees, indicating the common pursuit of all employees.

Hot Tags: freezer sandwich panels, China, suppliers, manufacturers, factory, customized, low price, for sale, puf partition panel, fiberglass composite panels price, camper body box, fiberglass roof panels 10 , fiberglass swimming pool shell, frp panels for sale

[[ProKeywords]]

SPEC DATA

Send Inquiry

Send a Message