28mm 30mm 32mm 35mm 38mm 40mm 45mm 50mm 60mm 70mm 75mm 80mm 90mm 100mm Aluminum Honeycomb Panel

With a new attitude, open-mindedness, sincere cooperation and sincere service, we will standardize our operation, develop and innovate, and create greater value for the development of the fiberglass reinforced polyester sheet, sandwich panel for truck box, solar products industry. We have complete material production line, assembling line, quality control system, and the most importantly, we have many patents technology and experienced technical&production team, professional sales service team. After years of entrepreneurial innovation, we have formed a development pattern that is dominated by high-tech industries and combined with emerging industries and traditional industries. Our company is also actively learning from and introducing advanced technology and production process, the scientific and technological content of products is constantly improving, and the types are also constantly enriched.

Product Details Map

Features

FRP has the characteristics of light weight, high specific strength, corrosion resistance, good electrical insulation performance, slow heat transfer, good heat insulation, good instantaneous ultra-high temperature resistance, easy coloring, and can penetrate electromagnetic waves. Compared with commonly used metal materials, it also has the following characteristics:

1. Since FRP products can be designed and manufactured according to different use environments and special performance requirements, as long as suitable raw material varieties are selected, they can basically meet the performance requirements of various application occasions. Therefore, FRP material is a designable material variety.

2. FRP products are disposable in the manufacturing process, which is another notable feature different from metal materials. Just choose the appropriate laying method and the arrangement of raw materials according to the product design, and complete the FRP material and structure at one time.

3. FRP material is also an energy-saving material. If the manual pasting method is adopted, the temperature during molding is generally below room temperature or 100°C, so the energy consumption for molding and production is very low. Even if mechanical forming methods are used, such as molding, winding, injection, RTM, injection, pultrusion and other forming methods, the forming temperature is much lower than that of metal materials and other non-metal materials.

To sum up, compared with traditional metal materials and non-metal materials, FRP materials and their products have the characteristics of high strength, good performance, energy saving, greater freedom in product design, and wide product adaptability. Therefore, in a sense, FRP material is one of the material varieties with a wide range of applications and broad development prospects.

Cold Storage Maintenance

1. When the cold storage is installed or used again after long-term use, the cooling rate should be reasonable: it is advisable to control it at 8-10°C every day, and keep it at 0°C for a period of time.

2. For the maintenance of the cold storage board, pay attention to the collision and scratching of the storage body by hard objects during use. Because it will cause the sink and corrosion of the storage board, which will seriously reduce the local insulation performance of the storage body.

3. Maintenance of cold storage seals. Since the prefabricated cold storage is spliced by several insulation boards, there are gaps between the boards. These gaps are sealed with sealant during construction to keep air and moisture out. Therefore, during use, some parts should be repaired in time if the seal fails.

4. Cold storage ground maintenance. The floor of small pre-refrigerated storage is generally made of insulation board. When using cold storage, prevent a large amount of ice water on the ground. If there is ice, do not hit it with hard objects when cleaning, which may damage the ground.

In accordance with all quality control process requirements, we ensure that all the 28mm 30mm 32mm 35mm 38mm 40mm 45mm 50mm 60mm 70mm 75mm 80mm 90mm 100mm Aluminum Honeycomb Panel meet our customers' needs. We always take the interests and needs of our customers as the foundation, and provide our users with cost-effective products meticulously, carefully and attentively. We have advanced production equipment and high-quality technical management personnel, and adhere to the requirement of 'high-standard and strict production management'. Therefore, our products are well received by customers.

Hot Tags: embossed frp sheet, China, suppliers, manufacturers, factory, customized, low price, for sale, foam core panels, frp panels cost per sq ft, corrugated fibreglass sheet, 50mm eps panel, FRP panel for clean room, fiberglass trailer wall panels