FRP Gelcoat Panels For For Refrigerated Truck Body

Product Introduction

FRP (Fiberglass Reinforced Plastic) Gel Coat Panels have become the material of choice for refrigerated truck body construction worldwide. From refrigerated vans and isothermal trailers to multi-temperature cold chain vehicles, these panels serve as the primary exterior skin - protecting the insulation core, maintaining thermal efficiency, and withstanding the harsh operating conditions of food-grade and pharmaceutical transport.

A refrigerated truck body typically consists of a sandwich structure: an insulating core (PU/PIR foam or EPS) bonded between inner and outer facings. The outer facing - directly exposed to weather, road debris, UV radiation, and frequent high-pressure washing - is where FRP gel coat panels deliver their greatest value.

Key Features

1. Machine continuously made flat gel coat sheet

2. Anti-impact: much better stiffness and strength than plastic, due to fiberglass reinforced;

3.Fire resistant: made by thermosetting resin;

4.Mildew resistant: Effectively inhibit the growth of mildew;

5. Easy install: No other tools are needed except for rivet or glue only;

6. Anti-corrosive:

7. Easy cleaning: It can be easy cleaned by steam or high-pressured squirt gun;

8. Extreme temperature resistant: Withstand temperature at -40 -110 degree C for long time;

9.Rolled up by machine with 50-100m length as a coil, to save shipping cost.

Typical Applications

A. Side Wall Panels - The largest surface area. FRP panels form the outer skin of side walls, protecting the PU/PIR insulation core from impact, moisture, and UV. Must withstand road vibration, stone chips, and lateral loading forces.

B. Roof Panels - Top surface exposed to direct sunlight and rain. The UV-resistant gel coat layer prevents yellowing, cracking, and degradation. Low thermal conductivity helps reduce solar heat gain into the cargo area.

C. Rear Door Panels - High-traffic area subjected to frequent opening/closing, forklift contact, and cargo loading impact. Requires high impact resistance and surface hardness. Gel coat surface enables easy cleaning after each trip.

D. Front Wall Panels - Connects the refrigeration unit to the body. Must maintain structural integrity and thermal seal. FRP panels provide a stable, non-corrosive mounting surface for refrigeration components.

Technical Specifications

FAQ

1 Pyament terms

30% in advance,70% before loading

2 How can we guarantee quality?

Always a pre-production sample before mass production;
Always final Inspection before shipment;

3 What can you buy from us?

FRP skylight panel,FRP gelcoat panel,FRP sandwich panel and so on.

4.Why should you order from us

Tangshan Runfeng have been producing fiberglass panel line with over twenty years history. Fiberglass mesh, chopped strand mat, tissue mat, woven roving, FRP products have been exported to USA, Canada, Middle East, South America, Australia. Korea,Vietnam and so on.

5.What services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,RMB;
Accepted Payment Type: T/T,L/C

Request a Free Quote

Looking for FRP gelcoat Panels? Contact RUNFENG today for samples, technical support, customized solutions, and pricing information. Our team will respond within 24 hours.

Hot Tags: frp gelcoat panels for for refrigerated truck body, China, suppliers, manufacturers, factory, customized, low price, for sale